On-site furniture quality inspection in India
On-Site
Before You Pay

Why Furniture from India Fails After It Arrives

Furniture rarely fails on the day it ships. It fails weeks later, in your customer's home. Timber that was not dried properly shrinks and cracks once it reaches a dry, heated home. A finish applied in monsoon humidity bubbles or peels in transit. A stain that matched the sample in one batch drifts in the next. These are delayed failures — and by the time you see them, the balance is already paid.

That is why we inspect on site, at every stage, and why your balance is released only after a passed pre-shipment report. We are paid by you, the buyer — we take no commission from the factory, so a failed inspection costs us nothing and saves you a container you cannot sell.

  • Timber moisture, measured: Moisture-meter readings on stock and finished pieces, against a target set for your destination climate (typically 8–12%).
  • Joints & structure, tested: Mortise-and-tenon and dowel checks, glue curing, racking and stability tests — not just a visual look.
  • Finish vs your golden sample: Colour and sheen compared under consistent light, so batch drift is caught before packing.
  • A clear verdict: Every report ends Cleared, Hold or Rework — and we chase the rework with the factory and re-inspect, not just hand over a PDF.
  • Compliance collected: STURDY, TSCA, Lacey Act and EUDR documents gathered from the factory before dispatch.
Book a Furniture Inspection →

Furniture We Inspect in India

🪑
Solid Wood
Sheesham, mango, acacia
✨
Bone Inlay
Inlay, painted, carved pieces
🛋️
Upholstered
Foam, fabric, springs, frames
🪨
Mixed Material
Marble tops, metal-wood pieces

Furniture Inspection, Stage by Stage

From timber yard to loaded container — here's what we verify at each stage

🪵

Pre-Production

Species confirmed, kiln-drying checked, and moisture-meter readings taken on the timber stock against your destination-climate target.

🔧

During Production

At 20–30% complete: joints, glue curing and frame strength checked, so a structural problem is fixed before the whole run is built.

🎨

Finish

Colour and sheen compared with your approved golden sample under consistent light, so batch drift is caught before packing.

📋

Pre-Shipment (AQL)

AQL sampling (2.5 major / 4.0 minor), function tests on every sampled piece, and carton contents matched to the packing list.

📦

Loading Supervision

Container loading supervised, carton counts verified, and the seal recorded — so what was inspected is what actually ships.

📄

Report & Rework

Photographed findings graded critical, major or minor, with a Cleared, Hold or Rework verdict — and we chase the rework and re-inspect.

How a Furniture Inspection Works

1

Send Your Order

Product, factory, quantity and your spec — including the moisture target for your market and your approved sample. We confirm the inspection date and scope.

2

We Inspect On Site

Our inspector visits the workshop with a moisture meter, the spec sheet and your golden sample, and checks the goods piece by piece.

3

You Get the Report

A photo report with findings graded critical, major or minor, and a clear Cleared, Hold or Rework verdict. You decide — the balance stays with you until you are satisfied.

4

Rework & Re-Inspection

If the order fails, we go back to the factory with the defect list, chase the rework, and re-inspect the fixed pieces before anything ships.

Book a Furniture Inspection → See Furniture Sourcing

Buyer Applications

Our furniture inspection serves international buyers across multiple sectors

🏪

Retailers & Importers

Container-load furniture with a passed inspection before the balance is released.

🏨

Hotels & Hospitality

Custom furniture programmes inspected piece by piece, to your spec.

🎨

Interior Designers

Bespoke pieces checked against your drawings, dimensions and finish.

🛒

E-commerce Sellers

Consistent quality across repeat orders, so returns stay low.

🏗️

Contractors & Developers

Bulk furniture supply inspected at each stage, with loading supervision.

🌳

Outdoor & Garden

Acacia and weather-resistant pieces checked for finish and hardware.

Furniture Quality Inspection FAQ

What moisture level should my furniture be at? +

It depends on where the furniture will live. As a guide, we target typically 8–12% moisture, set against the climate of your destination market — drier for heated homes in cold climates, adjusted for humid ones. Timber above the target will shrink and crack after it arrives. We measure it with a moisture meter on the stock and on the finished pieces, and we record the readings in your report.

What AQL level should I use for furniture? +

We use AQL 2.5 for major defects and 4.0 for minor defects as our standard for furniture pre-shipment inspection. Critical defects — a broken frame, a missing part — are not sampled; any critical defect fails the piece. We agree the level with you before the inspection, and it is written in your report.

Can I use my own inspector as well? +

Yes. Many buyers run our inspection alongside their own inspector or their retailer's QC team. We share the spec, the golden sample and the defect list, so both inspections judge the same standard. Two independent checks are better than one — especially on a first order with a new factory.

What happens if the factory refuses to fix the defects? +

That is exactly why the balance is held until the inspection passes. We take the defect list back to the factory, agree what must be reworked, and re-inspect the fixed pieces. If the factory will not fix a failed order, you have a documented report to support holding payment or renegotiating — and you have not paid for goods you cannot sell.

How fast do I get the report, and what does an inspection cost? +

You get a photo report with the verdict the same day as the inspection, or the next day for a large order. Inspections are billed per man-day — $200 in Jodhpur, $300 in other Rajasthan cities, and $350–$500 outside Rajasthan. Factory audits are $350 in Jodhpur and $550 in other cities; social compliance audits (SEDEX/BSCI) are $450 in Jodhpur and $750 in other cities. Our sourcing and QC work is charged as a 5–10% commission on order value or a $1,500–$3,000 monthly retainer. We confirm the cost per order before we book, so there are no surprises.