Third party product inspection in India
Independent
Paid by You

What Is Third Party Inspection — and Why It Must Be Independent

Third party inspection means someone other than you and the factory checks your goods before you pay for them. The key word is independent: we are paid by you, the buyer, and we take no commission from the factory. A factory's own QC checks whether the goods left the factory; our inspection checks whether the goods are what you ordered, to the spec you approved, in the quantity you paid for.

There are three main types — PSI, DPI and FRI — and they are used at different points in an order. Picking the wrong one wastes money; picking the right one saves a container you cannot sell. This page explains the three types and how our service works. If you already know you need a pre-shipment inspection, see our pre-shipment inspection (PSI) page for the detail on that type.

  • PSI — Pre-Shipment Inspection: When 80% or more of production is complete and goods are packed. Checks product quality and packing. Best for most orders, especially first orders or inconsistent quality.
  • DPI — During Production Inspection: When 20–60% of production is complete. Catches problems early, before the whole order is made. Best for large orders, new products and custom designs.
  • FRI — Final Random Inspection: On finished, packed goods ready for shipment. A statistical sample is pulled from the packed cartons. Best for reorders from trusted suppliers.
  • Container loading supervision: We supervise the loading, verify carton counts, and record the seal — so what was inspected is what actually ships.
  • Your money stays with you: The balance is released only after a passed report. A failed inspection costs us nothing and saves you a container you cannot sell.
Book an Inspection →

The Three Inspection Types, at a Glance

📋
PSI
Pre-shipment, 80%+ complete
🏭
DPI
During production, 20–60%
📦
FRI
Final random, packed goods
🔒
Loading
Supervised stuffing & seal

What a Third Party Inspection Covers

Every inspection checks the same six things — the type (PSI, DPI or FRI) decides when in the order we check them

🔍

Product Quality

Workmanship, materials and finish checked against your approved sample and spec — the defects that matter for your product, not a generic checklist.

📦

Packing

Carton strength, cushioning, dividers and export packing checked, so goods survive the container and arrive sellable.

🔢

Quantity & Count

Carton counts and piece counts verified against your order and the packing list — so you are not short-shipped.

🏷️

Labelling & Barcodes

Labels, care instructions and barcodes checked against your spec, so goods arrive retail-ready.

⚙️

Function Tests

Function and safety tests run on the sampled pieces — drawers, hinges, switches, stitching — whatever your product must do, we test it.

📄

Documentation

Certificates, test reports and compliance documents collected from the factory before dispatch, so your shipment clears customs without delay.

How a Third Party Inspection Works

1

Send Your Order

Product, factory, quantity, spec and approved sample. We confirm the inspection type (PSI, DPI or FRI), the date and the cost before we book.

2

We Inspect On Site

Our inspector visits the factory with your spec and sample, and checks the goods piece by piece using AQL sampling.

3

You Get the Report

A photo report with findings graded critical, major or minor, and a clear Cleared, Hold or Rework verdict. You decide — the balance stays with you until you are satisfied.

4

Rework & Re-Inspection

If the order fails, we go back to the factory with the defect list, chase the rework, and re-inspect the fixed pieces before anything ships.

Book an Inspection → See Pre-Shipment Inspection (PSI)

Buyer Applications

Our third party inspection serves international buyers across multiple sectors

🏪

Retailers & Importers

Container-load orders inspected before the balance is released.

🏷️

Brands & Private Label

Your spec and your sample, checked piece by piece.

🛒

E-commerce Sellers

Consistent quality across repeat orders, so returns stay low.

🆕

First-Time Buyers

Your first order with a new factory — inspected before you pay.

📦

Distributors

Large orders checked at DPI and PSI, so a problem is caught early.

🏨

Hotels & Projects

Custom and contract orders inspected to your project spec.

Third Party Inspection FAQ

Which inspection do I need — PSI, DPI or FRI? +

For most orders, PSI (pre-shipment, when 80% or more is complete and packed) is the right choice — it checks product quality and packing before dispatch, and it suits first orders and inconsistent quality. Use DPI (during production, at 20–60% complete) for large orders, new products and custom designs, where an early problem would be repeated across the whole order. Use FRI (final random, on finished packed goods) for reorders from a trusted supplier, where you want final verification without opening all the packing. If you are unsure, tell us about the order and we will recommend the type.

When should I book the inspection? +

Book as soon as the production schedule is set — do not wait until the goods are ready. A DPI needs to be scheduled while production is at 20–60%, and a PSI needs the goods to be at least 80% complete and packed. Tell us the factory and the expected ready date, and we will set the inspection for the right day.

What does AQL mean, and what level do you use? +

AQL (Acceptable Quality Limit) is the sampling standard: instead of checking every piece, we check a statistical sample and judge the lot by it. Our standard is AQL 2.5 for major defects and 4.0 for minor defects. Critical defects — a broken frame, a missing part, a safety failure — are not sampled; any critical defect fails the piece. We agree the level with you before the inspection.

What happens if the inspection fails? +

You get a photo report with the findings graded critical, major or minor, and a clear Hold or Rework verdict. The balance stays with you. We take the defect list back to the factory, agree what must be reworked, and re-inspect the fixed pieces. If the factory will not fix a failed order, you have a documented report to support holding payment or renegotiating.

What does an inspection cost? +

Inspections are billed per man-day — $200 in Jodhpur, $300 in other Rajasthan cities, and $350–$500 outside Rajasthan. Factory audits are $350 in Jodhpur and $550 in other cities; social compliance audits (SEDEX/BSCI) are $450 in Jodhpur and $750 in other cities. Our sourcing and QC work is charged as a 5–10% commission on order value or a $1,500–$3,000 monthly retainer. We confirm the cost per order before we book, so there are no surprises — and because we are paid by you, a failed inspection costs us nothing.