During Production Inspection (DUPRO) in India
A during production inspection checks your order while it is still being made — at 20–60% complete — so a problem found on piece 50 is not repeated on pieces 51 to 5,000.
What a During Production Inspection Does
A during production inspection, known as DUPRO or DPI, takes place in the middle of the production run. Our inspector visits the factory when roughly 20–60% of your order is finished, checks the finished pieces against your approved sample and specification, and looks at the raw material and work in progress. At this stage the factory can still correct a finish before the rest is made the same wrong way.
The difference from a pre-shipment inspection is simple. A pre-shipment inspection (PSI) happens when 80% or more of the order is complete and packed — it judges the finished goods. A DUPRO happens while the order is still open, so it can change the outcome. If the first 200 chairs have the wrong stain, a PSI tells you the order failed. A DUPRO tells you at chair 200, while 800 chairs are still unmade.
DUPRO is not needed on every order. For a small reorder from a factory that has already made the same product well, a PSI alone is usually enough. DUPRO earns its place on large orders, first orders, new products and custom designs.
- Timed at 20–60% complete: early enough to change the run, late enough that finished pieces exist to check.
- Raw material checked: timber, stone, fabric, metal and hardware compared with the approved sample before the stock is used up.
- Finished pieces measured: dimensions, finish, colour, stitching and assembly checked against your specification.
- Production pace checked: pieces finished per day against the schedule, so a late order is flagged in time to act.
- Photo report the same day: defects graded critical, major or minor, with a verdict on whether production should continue.
- Rework agreed on the spot: the defect list goes to the factory the same day, with what must change before the rest is made.
When a DUPRO Runs, and What It Gives You
What a DUPRO Covers on the Factory Floor
We check the materials, the finished pieces, the work in progress and the schedule
Raw Material Check
Timber, stone, fabric, metal and hardware compared with the approved sample before the stock is used.
Finished Pieces Measured
Pieces already made measured against your specification: dimensions, joints, carving, stitching, polish and finish.
Work in Progress
Half-finished pieces show how the factory is working — glue lines, welds, sanding and assembly — before defects hide under a final coat.
Packing Material
Cartons, foam, dividers and labels on site checked for strength and size, so packing is not a last-minute problem.
Production Schedule
Pieces finished per day against the agreed schedule. If the factory is behind, you hear it at 40% complete.
Photo Report & Verdict
Every defect photographed and graded critical, major or minor, with a verdict: continue, correct, or stop and fix.
DUPRO Inspection Rate Card
A DUPRO is charged per man-day on site. A fault caught at 20–60% complete costs one inspection day to fix; the same fault found after packing costs a rework of the finished order. You get the exact figure before we book the visit.
| Service | Rate |
|---|---|
| During production inspection — Jodhpur | $200 per man-day |
| During production inspection — other Rajasthan cities | $300 per man-day |
| During production inspection — outside Rajasthan | $350–$500 per man-day |
| Sourcing service | 5–10% commission on order value, or $1,500–$3,000 per month retainer |
| Extra samples and shipping | Around $30 and up |
| Lab testing | At cost |
| First consultation call | Charged — minimum USD 200 |
Nothing else is free: sourcing and inspection are both charged. A DUPRO usually takes one man-day. Sampling follows AQL 2.5 for major defects and 4.0 for minor defects — the same standard as our PSI.
DUPRO Checklist: What to Prepare
A DUPRO works only if the inspector arrives with the right documents and the factory expects the visit.
- Approved sample: send photos and the specification, or ship the physical sample to us before the visit.
- Written specification: dimensions, materials, colour, finish, hardware and packing, in one document the factory has agreed to.
- Order quantity and schedule: total pieces, start date and ready date, so we time the visit at 20–60% complete.
- Defect list from past orders: if this factory has failed before, tell us what went wrong so the inspector looks for it first.
- Factory contact and address: the name and phone number of the person on the floor, and the exact location.
- Confirm the visit with the factory: the factory must expect our inspector and have finished pieces available to check.
- Decide the AQL level: our standard is AQL 2.5 major / 4.0 minor; say so before the visit if you want a stricter limit.
- Agree what happens on a fail: decide in advance whether production stops, continues with corrections, or continues while rework is agreed.
How a DUPRO Runs, Step by Step
Send the Order Details
Product, factory, quantity, specification and approved sample. We agree the date — timed at 20–60% complete — and confirm the cost.
Inspector Visits Mid-Run
Our inspector checks raw material, finished pieces and work in progress against your sample and spec, and counts output against the schedule.
You Get the Photo Report
Defects photographed and graded critical, major or minor, with a verdict: continue, continue with corrections, or stop and fix.
Corrections, Then PSI
The factory fixes what the report lists, and production continues on the corrected method. A PSI at 80%+ complete then checks the finished order.
When DUPRO Saves Money, and When PSI Alone Is Enough
DUPRO pays when a mistake would be repeated across the whole order. It does not pay on every order.
DUPRO saves money on large orders, because one inspection day costs little next to remaking or discounting a full container. It saves money on first orders with a new factory, on new products and custom designs, and wherever a single wrong input — the wrong timber, the wrong dye lot, the wrong stone thickness — would be used across every piece before anyone noticed.
PSI alone is enough on a small reorder of a product the factory has already made well for you, where the risk is a packing or count problem rather than a production problem. The honest rule: if the same mistake could be made 500 times before dispatch, book a DUPRO; if the order is small and proven, book the PSI. Many buyers use both on the orders that matter most. See also our container loading inspection and quality control inspection pages.
Related Pages
DUPRO is one stage of quality control — these pages cover the stages before and after it.
Pre-Shipment Inspection
The final check on the finished order, once packing is done
Container Loading Inspection
The last check — every carton counted as it goes into the container
Quality Control Inspection
How PSI, DUPRO, loading and final random fit together
Third Party Inspection
Independent inspections from a third party, not the factory
Factory Audit
Was the factory able to make your order in the first place?
Supplier Verification
Is the supplier real, legal and able to deliver?
AQL Sampling Guide
How many pieces we sample, and how many defects fail the lot
Who Books a DUPRO
DUPRO suits buyers whose orders are large, new or custom — where an early mistake is the expensive kind
Retailers & Importers
Large container orders checked mid-run, so a repeated defect never reaches the full lot.
Brands & Private Label
Your spec and your sample checked while production can still be corrected to match them.
E-commerce Sellers
Consistent quality across a long run, so listings stay true and returns stay low.
First-Time Buyers
A first order with a new factory — checked mid-run, not only at the end.
Distributors
High-volume orders where one wrong material or finish would affect every carton.
Hotels & Projects
Custom and contract orders — furniture, stone and décor — checked against the project spec mid-run, before the mistake repeats across the whole order.
During Production Inspection FAQ
How is a DUPRO different from a pre-shipment inspection (PSI)?
Timing and purpose. A DUPRO runs at 20–60% of production complete, while the order is still being made, and it can change how the rest of the order is produced. A PSI runs at 80% or more complete, when the goods are finished and packed, and it judges the finished order.
When should I book a DUPRO?
As soon as the production schedule is set. Give us the factory, the start date and the expected ready date, and we will place the visit at 20–60% complete. Book late and production is already past 60%, so the visit becomes a PSI and the chance to correct the run is gone.
What AQL level do you use for a DUPRO?
Major defects are judged at AQL 2.5, minor defects at 4.0. We pull a statistical sample of the finished pieces and judge the lot from it. Critical defects — a broken frame, a missing part, a failed safety test — fail the piece outright.
What happens if the DUPRO finds problems?
You get a photo report the same day with defects graded critical, major or minor, and a verdict: continue, continue with corrections, or stop and fix first. We take the defect list to the factory the same day and agree what must change.
What does a DUPRO cost?
A DUPRO is priced per man-day on site — $200 per man-day in Jodhpur, $300 per man-day in other Rajasthan cities, and $350–$500 per man-day outside Rajasthan. Our sourcing fee is separate — 5–10% of the order value, or a $1,500–$3,000 retainer each month. Extra samples and shipping start at around $30, lab testing is billed at cost, and the first call with us is charged.